home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
CD ROM Paradise Collection 4
/
CD ROM Paradise Collection 4 1995 Nov.iso
/
hamradio
/
rigeqf22.zip
/
VENDINFO.DIZ
< prev
next >
Wrap
VENDINFO
|
1995-10-07
|
14KB
|
302 lines
+-------------------------------------------────────-----────────----+
| This VENDINFO Product Information File contains both readable text |
| and tools-accessible data about a product. See the last text |
| section, below, for more information about VENDINFO and its tools. |
+--------------------------------------------------------------------+
VENDINFO standard v1.04, produced by VendEdit v1.30, 7-Oct-1995
===== Product Information ==============================
Product: Rig-EQF Kenwood Radio Control
Version: 2.22
Version Date: 7-Oct-1995
Product Type: Software
Basic Distribution Policy (see License, below, for details):
Shareware, subject to distribution restrictions
Product Description: Rig-EQF v2.22 <ASP> Full-featured Kenwood
radio control for Amateur Radio or SWL.
Provides control for up to four radios on
separate COM ports.
Large digital frequency display, programmable
scanning, rig memory upload and download, VFO
control, and much more. Supports all control
features offered by Kenwood.
Reason for version: Update to previous versions
Category: Home & hobby; Ham radio
Keywords: ham radio rig kenwood SWL
Required Packages: RIG_EQF
This Package: RIG_EQF
Registration Fee: 20.00 (U.S.)
Required Configuration
Processor Family: Intel 80x86 (minimum 8086/8088)
Clock Speed: 8 MHz
Minimum OS: MS-DOS 3.3
Standard RAM: 520K
Hard Drive Space: 1K
Required:
Serial
Keyboard
Orders:
Address: EQF Software
396 Sautter Drive
Coraopolis, PA 15108
Toll-Free Phone: 1-800-995-1605
Phone: 1-619-685-7291
FAX: 1-619-558-7850
CompuServe: 71561,1441
Internet: n3eqf@usaor.net
Support:
Address: EQF Software
396 Sautter Drive
Coraopolis, PA 15108
Phone: 412-457-2584
CompuServe: 71561,1441
Internet: n3eqf@usaor.net
===== Information for Users ("READ-ME") ================
Rig-EQF Version 2 is a powerful, full-featured, and easy to use
Kenwood radio control program for Amateur Radio operators and Short Wave
Listeners.
DESCRIPTION: Rig-EQF features a menu-driven system, complete with
mouse control. Rig-EQF provides comprehensive computer control of your
Kenwood rig, utilizing the COM port interface. Various radio parameters
can be controlled and monitored via the computer, increasing the power
and flexibility of your station.
Rig-EQF provides a large digital display of current VFO frequency,
S-meter and Power Output meter displays for rigs with this capability,
sophisticated programmable scanning, rig memory disk storage, local
memories, and much more.
SYSTEM REQUIREMENTS: Rig-EQF can be run on any 100% IBM-
compatible computer with at least 256K memory and DOS 3.3 or
higher. The program works with all video adapters, monochrome or
color. A mouse is supported but not required.
REGISTRATION: The user registration fee for Rig-EQF is $20 (U.S.
funds). Registered users receive the latest version of Rig-EQF.
Registered users will also receive automatic notification of
future program updates. VISA or Master Card orders can be placed
by calling 1-800-995-1605. The author is a member of the
Association of Shareware Professionals.
-----------------------------------------------------------------
Tom Dandrea, N3EQF - 396 Sautter Drive - Coraopolis, PA 15108 USA
===== Packing List =====================================
As released by the author or publisher, this package contained the
following files in addition to this VENDINFO.DIZ:
Filename Size Date Time CRC32
READ_ME.1ST 171 7-Oct-1995 02:22a F9D97F00
INSTALL.BAT 332 7-Oct-1995 05:32p C50C8874
READ_ME.BAT 411 7-Oct-1995 02:22a 16980DAA
FILE_ID.DIZ 326 7-Oct-1995 02:22a 63AD2AE4
README.DOC 5560 7-Oct-1995 05:32p F50F127E
REGISTER.DOC 2544 7-Oct-1995 05:32p 6E7D0E80
VENDOR.DOC 216 7-Oct-1995 02:22a 13796CEE
INS-EQF.EXE 58492 7-Oct-1995 05:32p 3D18D079
RIGEQF.EXE 78325 7-Oct-1995 05:32p 4C605D76
VIEW-EQF.EXE 14234 7-Oct-1995 05:32p 4F717960
VENDOR.TXT 216 7-Oct-1995 02:22a 13796CEE
===== Installation =====================================
The installation procedure for Rig-EQF is quite simple. The
package includes a program, "INSTALL", which automates the
entire process. You will need about 360K of available disk space
on the disk drive on which you plan to install Rig-EQF.
The exact steps you need to take will depend on how you received
Rig-EQF.
INSTALLING FROM DISKETTES
To install from diskette(s), you need to perform the following steps.
o Place Rig-EQF distribution diskette "Disk 1" in the
appropriate diskette drive.
o Execute the "INSTALL.BAT" program on the distribution diskette.
For example, if the distribution diskette is on drive A:, type
the MS-DOS command, "a:", and then type "INSTALL"
o Follow the instructions presented by the installation program.
You will have a chance to approve installation before any changes
are actually made to the contents of your hard drive. The
program will ask you for a destination directory, and will copy
the Rig-EQF files to that directory. If you received Rig-EQF
on two diskettes, you will need to insert Disk 2 in the diskette
drive when asked to do so. If you so direct it, the installation
program will install executable programs and documentation in
other directories of your choice. It will make no other changes;
specifically, it will not modify your autoexec.bat or config.sys
files.
INSTALLING FROM A HARD DRIVE
If you downloaded Rig-EQF from a BBS (or received it in the form of
archive files from some other source), you will need to perform the
following steps.
o Extract the contents of the archive file(s) in a temporary
directory on your hard drive. The procedure for doing this
varies, depending on the form in which you received the package.
In all likelihood, the fact that you are reading this text means
that you already have the necessary tools and knowledge to
perform this step. If not, you should be able to obtain
directions for this from the same source from which you received
the package.
o Execute the "INSTALL" program which you have extracted. For
example, if the temporary directory into which you have extracted
the Rig-EQF package is C:\TEMPDIR, you would execute the MS-DOS
command, "cd c:\tempdir\", and then type "INSTALL".
o Follow the instructions presented by the installation program.
You will have a chance to approve installation before any changes
are actually made to the contents of your hard drive. The
program will ask you for a destination directory, and will copy
the Rig-EQF files to that directory. If you so direct it, the
installation program will install executable programs and
documentation in other directories of your choice. It will make
no other changes; specifically, it will not modify your
autoexec.bat or config.sys files.
When you're satisfied that the installation was successful, you should
delete the temporary directory FROM which you installed Rig-EQF
(C:\TEMPDIR, in the above discussion), including all its contents.
YOU'RE READY TO GO
Once you've complete the installation, you should consult the documents
(filename extension "doc") which have been installed. In particular,
read at least the "Overview" and "Quick Start" sections of the file
"RIG-EQF.DOC". That document will tell you how to invoke the program,
and will give you other information you need to properly evaluate
Log-EQF. We hope you enjoy the program.
===== Warranty =========================================
LIMITED WARRANTY
THIS SOFTWARE AND MANUAL ARE PROVIDED FOR EVALUATION ONLY, ON AN "AS
IS" BASIS. <EQF Software> DISCLAIMS ALL WARRANTIES RELATING
TO THIS SOFTWARE, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. NEITHER <EQF Software> NOR ANYONE ELSE
WHO HAS BEEN INVOLVED IN THE CREATION, PRODUCTION, OR DELIVERY OF
THIS SOFTWARE SHALL BE LIABLE FOR ANY INDIRECT, CONSEQUENTIAL, OR
INCIDENTAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH
SOFTWARE, EVEN IF <EQF Software> HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR CLAIMS. THE PERSON USING THE SOFTWARE
BEARS ALL RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE.
This agreement shall be governed by the laws of the State of PA
and shall inure to the benefit of <EQF Software> and any
successors, administrators, heirs and assigns. Any action or proceeding
brought by either party against the other arising out of or related to
this agreement shall be brought only in a STATE or FEDERAL COURT of
competent jurisdiction located in Allegheny County, PA. The parties
hereby consent to in personam jurisdiction of said courts.
===== License for Use and Distribution =================
TRIAL USE LICENSE
Rig-EQF is NOT a public domain program. It is copyrighted by
EQF Software. This software and accompanying documentation are
protected by United States copyright law and also by international
treaty provisions.
EQF Software grants you a limited license to use this software
for evaluation purposes for a period not to exceed thirty days. If you
continue using this software after the thirty-day evaluation period,
you MUST make a registration payment to EQF Software.
You may not use, copy, rent, lease, sell, modify, decompile,
disassemble, otherwise reverse engineer, or transfer the licensed
program except as provided in this agreement. Any such unauthorized
use shall result in immediate and automatic termination of this license.
All rights not expressly granted here are reserved to EQF Software.
LIMITED DISTRIBUTION LICENSE
The attached VENDINFO data record is hereby incorporated by reference.
Any distribution satisfying all the distribution requirements expressed
in that data record is hereby authorized.
Permission to distribute the Rig-EQF package is not transferable,
assignable, saleable, or franchisable. Each vendor wishing to distribute
the package must independently satisfy the terms of this limited
distribution license.
U.S. Government Information: Use, duplication, or disclosure by the
U.S. Government of the computer software and documentation in this
package shall be subject to the restricted rights applicable to
commercial computer software as set forth in subdivision (b)(3)(ii) of
the Rights in Technical Data and Computer Software clause at
252.227-7013 (DFARS 52.227-7013). The Contractor/manufacturer is
EQF Software, Tom Dandrea - N3EQF, 396 Sautter Drive, Coraopolis, PA
15108, U.S.A.
EQF Software, (Tom Dandrea) may revoke any permissions granted here, by
notifying you in writing. All rights not expressly granted here are
reserved to EQF Software.
===== About VENDINFO Files =============================
Each VENDINFO.DIZ file contains extensive information about a product.
This "human-readable" section is followed by a compressed data record
useable by automated tools. The data record allows BBSes and other
distributors to automate package handling, and provides users with a
wealth of product information. VENDINFO tools (free viewer for users,
free or inexpensive processors for distributors, editors for authors)
are available from many sources, including the originators of VENDINFO:
Rams' Island Software Voice: 303-841-2848 CompuServe: 76244,324
7644 E. Lakecliff Way BBS: 303-841-6269 FidoNet: 1:104/333
Parker, CO 80134-5904 USA FAX: 303-841-6269 RIME: 1235
===== Compressed Data Record Follows ===================
PK